Beijing Tianyu Merlot anti-static flooring professionals dedicated to the U.S. Department of exposed steel outlet plate 3, the United States exposed outlet plate, Merlot ventilated floor, agency management offer installation. Modern room and office requires a complete air conditioning system, the United States exposed the floor for the entire refrigeration cycle to provide the best solution. Merlot floor outlet on the unit into the air, cold air directly into the equipment efficiently within the device cooling. Machinery and increased body heat through the ceiling into the ceiling air conditioning is excluded 
 Steel outlet with adjustable handle and a non-adjustable handle two kinds. Activities under-floor air pressure and air volume is based on a high floor and room to complete the requirements of the distribution from the outlet and the outlet placed on the panel to adjust the handle. Outlet ventilation area of ??16.2% -33%, and there are two types, adjustable and non adjustable type 

 Application areas: 
 Should the needs of users, Merlot No. 3 steel outlet plates can be used with different systems, used in different parts of the following: 
 ● production plant; 
 ● Laboratory; 
 ● clean room; 
 ● measurement chamber; 
 ● Data Center; 
 ● Copy field; 
 ● Computer Center 
 Advantages: 
 ● solid structure, carrying capacity and over-hit capability 
 ● complete accessories, flexible combination and strong 
 ● high flexibility; 
 ● Easy handling and installation of flooring materials; 
 ● light weight of the floor and systems; 
 ● adjustable floor height (according to customer needs, up to 1,000 mm or more); 

 Architectural principles 
 Raised floor: 
 Merlot No. 3 steel outlet plate is coated with a conductive powder welded steel frame and cover sheet, the standard system is from 16% to 40% free air flow consisting of the floor. 
 Base structure: 
 Base structure for different types of flooring, steel supports can any university with a high degree of user needs with precision. All stents were advanced through the galvanized and strengthening treatment, an increase of bending strength. The bottom bracket can be bonded on the lower ground, or as needed to reinforce the screw on the ground. Stand at the top of the shock pad can be fixed floor installation, and the role of a mute; shock pad is a conductor of electricity, such as the need to frequently lift the floor, shock pad can be locked with rivets fixed. The structure of the floor beams to increase lateral stability. Beams may also need to install later, another bracket and the beam can be fixed with screws to further position. U-shaped floor structure beam is generally used to increase lateral stability. The C-enhanced lateral stability in addition to more increase the carrying capacity of the floor structure. 




 1, the floor 
 2, anti-vibration pads 
 3, stand pipe 
 4, bottom bracket (adhesive on the lower ground, or need to insert the lower floor 




 Technical parameters Merlot floor steel outlet plate 3 
 Steel floor surface (coated with conductive powder) 
 Size 600mm x 600mm 
 Floor thickness (excluding veneer) 33-44mm 
 Floor weight 16-22kg/piece 
 Primary structure 
 Size 600mm x 600mm 
 Galvanized steel frame scaffolds 
 Structural height 70-1800mm 
 The proposal, if height of more than 500mm, recommend the use of beams 
 Capacity (concentration capacity) 
 Level according to DIN EN12825 5-6 
 General load 5.000-7.000N (higher load, then, need to order) 
 Maximum load> 10.000-14.000N 
 Conductive> 105Ohm (depending on the type of systems and veneer) 
 Fire Performance 
 Building materials according to DIN 4102 T1 floor level A1 
 F60 fire rating 
 Thermal conductivity (bottom material) about 50W/mk